Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Dryer Vent Cleaning in Miami: What to Know First
Dryer vent cleaning for Abatement Technologies systems in Miami typically runs $129 – $289 and is completed in a single visit, usually under two hours. We’re an independent Abatement Technologies service provider – not a factory-authorized shop – which means our recommendations are based on what’s actually in the vent, not a manufacturer upsell script. If you own an Abatement Technologies dryer or have one of their venting products installed, call (850) 660-3272 and we’ll give you a written price before anything gets touched.
This page is for Miami homeowners who want to know why their Abatement Technologies system isn’t moving air the way it should, what it costs to fix, and what actually happens during a proper cleaning. Roy Castellanos and our Miami crew have worked on Abatement Technologies venting products in homes from Kendall to Aventura, and the humidity here creates lint problems you won’t see in drier climates.
How Abatement Technologies Products Fail – and How We Fix Them
- Abatement Technologies dryer vent lint traps and secondary filters plug with wet-lint paste. Miami’s year-round humidity mixes with dryer exhaust moisture, turning loose lint into a damp paste that clings to Abatement Technologies filter media and reduces airflow fast. We remove and clean the filters, then run a negative-air extraction to pull the paste out of the vent run itself. This is a Miami-specific failure we see weekly in Coral Gables and Pinecrest homes.
- Abatement Technologies rigid vent runs develop lint shelves at every elbow. Their venting products use smooth-wall rigid sections, which is good, but every 90-degree elbow creates a ridge where lint accumulates. After 12 to 18 months of Miami use, the vent is effectively half its original diameter. Our rotary brush system breaks those shelves loose and the negative-air machine removes the debris – you get before-and-after photos of the actual vent interior.
- Abatement Technologies direct-drive dryer exhaust fans collect lint on the impeller blades. The fans in their venting systems are workhorses, but the impeller is a lint magnet. Once the blades load up, the fan vibrates and airflow drops. We clean the impeller by hand, inspect the motor windings, and document the condition before we leave. Most Miami homeowners don’t know this part exists until it fails.
- Exterior vent caps on Abatement Technologies installations corrode faster in salt air. Homes within a few miles of Biscayne Bay get accelerated corrosion on galvanized caps and flapper assemblies. We stock stainless replacements that fit Abatement Technologies vent terminations and won’t rust through in three seasons. We also install bird guards when we find the flapper jammed open by nesting material – common in Coconut Grove and Brickell.
- Abatement Technologies flexible transition ducts kink behind the dryer. The transition duct is the short flex connector between the dryer and the wall. If it was installed too long or the dryer got pushed back hard, it kinks and Miami’s humid exhaust makes the trapped lint congeal quickly. We replace it with a properly sized semi-rigid transition, cut to length, so the kink doesn’t return. This is a 20-minute fix most people don’t realize they need until we show them the photo.
Styles & brands we work with
Our Abatement Technologies Dryer Vent Cleaning Process
- 1
Call and schedule. A live person answers – no voicemail loop. We book you a window and our tech arrives inside it, uniformed and background-checked.
- 2
System inspection. We pull the dryer out, inspect the Abatement Technologies duct run, check every joint, and measure airflow at the vent termination. You see the readings.
- 3
Written price, no surprises. Before we clean anything, you get a written price for the job. It doesn’t move at the door. If we find something that needs work beyond the cleaning, we quote it separately before touching it.
- 4
Cleaning with professional equipment. We run a rotary brush through the full vent run while a negative-air machine pulls debris back out of the home, not into it. Abatement Technologies filter assemblies get cleaned and reinstalled.
- 5
Verification and documentation. We re-measure airflow at the termination, show you before-and-after photos of your own vents, and test the dryer through a full cycle.
- 6
Written guarantee. Every job is covered by the 365-Day Done Right Promise. If the vent fails within a year, we return and make it right at no charge – including a free second visit.
See the difference
Before
After
Before
After
Before
AfterWhat Abatement Technologies Dryer Vent Cleaning Costs in Miami
Straightforward Abatement Technologies dryer vent cleaning in Miami runs $129 – $189 for a single-story home with a short, direct vent run. Two-story homes with longer runs or multiple elbows run $189 – $249. If the vent hasn’t been cleaned in years and the lint is packed, add $40 – $60 for extended brush time and additional negative-air extraction. Bird guard installation, vent cap replacement, or transition duct replacement are quoted separately, typically $45 – $120 per item depending on roof access and the specific Abatement Technologies part.
What moves the price: roof access versus wall access, the length of the run, the number of elbows, and how much past-due lint has to be pulled out. You’ll know the exact number before we start. Call (850) 660-3272 for a free estimate.
Why Miami Homeowners Call Hollis Air Duct Miami for Abatement Technologies Work
We’ve been doing this since 2004, as part of the Garrison Partners family, and Miami homeowners call us because our standard matches what we say out loud. Every Abatement Technologies job gets a written price before the work starts, backed by a 365-Day Done Right Promise that covers the full vent system for a year. If the repair fails, we return at no charge. That’s not a slogan – it’s in writing.
Roy Castellanos grew up in Los Angeles and learned his trade fundamentals at Los Angeles Trade-Technical College before running crews through Southern California and then Miami. He’s worked duct systems in Brickell high-rises and older Coral Gables homes for well over a decade, and the humidity down here taught him things no classroom covers. Our technicians are background-checked and uniformed, and they operate under The Garrison Standard: arrive inside the window, price in writing, complete the job by the book, leave the site clean. We also service venting systems alongside other major brands – Lennox, Trane, and Carrier – so if your Miami home has mixed equipment, we’re already familiar with whatever is in the wall.
FAQs
No. We’re an independent Abatement Technologies service provider in Miami, which means we service their venting products without factory authorization. That independence is an advantage for you: our recommendations are based on what’s actually in your vent, not on what a manufacturer requires us to push. We use professional-grade equipment from Rotobrush, Nikro, Honeywell, and Abatement Technologies themselves when the job calls for it.
In Miami’s humidity, every 12 months is the safe interval, and every 6 months if you run the dryer daily with a large household. Lint builds faster in humid air, and Abatement Technologies filter assemblies need regular cleaning to keep airflow up. If you can’t remember the last cleaning, schedule one now – call (850) 660-3272 for a free estimate.
A professional cleaning will not void your warranty, and in fact, manufacturers require documented maintenance for coverage. What voids warranties is neglect – packed lint that causes the dryer to overheat and fail. We document every cleaning with before-and-after photos, which is exactly what you need if a warranty claim comes up later.
When a part must be replaced, we use Abatement Technologies OEM parts if they’re the right call for the job. For items like vent caps, bird guards, and transition ducts, we often use quality aftermarket parts that match or exceed OEM specs at a lower cost. You’ll know exactly which part is going in and what it costs before we install anything.
We hand you before-and-after photos of your own vent interior, and we measure airflow at the termination before and after the job. The numbers don’t lie. If the pictures and the readings don’t match what we promised, the 365-Day Done Right Promise applies, and we return at no charge. That’s the whole point of the standard.
Written by Roy Castellanos, Owner, Hollis Air Duct Miami at Hollis Air Duct Miami, serving Miami and nearby areas.